Faculty Information
Hung-Jen Lee
Title
Professor / Dean of Office of Research and Development
This email address is being protected from spambots. You need JavaScript enabled to view it.
Structural Engineering
EB415
4720
Ph.D., National Taiwan University of Science and Technology
Director of Service Center for Construction Technology and Materials
Post-Doctorial Study, National Taiwan University of Science and Technology
Instructor, Army Engineering School
Post-Doctorial Study, National Taiwan University of Science and Technology
Instructor, Army Engineering School
Seismic design of concrete structures
Laboratory testing on structural concrete
Behavior of beam-column joints
Mechanical splice and anchorage
Nonlinear modeling of concrete structures
Seismic evaluation and retrofitting
Laboratory testing on structural concrete
Behavior of beam-column joints
Mechanical splice and anchorage
Nonlinear modeling of concrete structures
Seismic evaluation and retrofitting
Material Mechanics
Reinforced Concrete
Concrete Member Behavior
Internship Industry (Ⅱ)
Reinforced Concrete Design (Ⅱ)
Reinforce Concrete Structural Laboratory
Earthquake Engineering and Seismic
Internship Industry (Ⅰ)
Reinforced Concrete
Concrete Member Behavior
Internship Industry (Ⅱ)
Reinforced Concrete Design (Ⅱ)
Reinforce Concrete Structural Laboratory
Earthquake Engineering and Seismic
Internship Industry (Ⅰ)
2008, 2010, 2017 Outstanding teaching award in Yuntech
2013, 14, 16 Outstanding teaching award in the college of Engineering
2015, 16, 17 Outstanding Industry-Academy Cooperation award in the college of Engineering
2018, 2020~2023 MOST Special Excellence Award in Research
2018 Yuntech Higher Education Sprout Project, Special Bonus Award (Industry-Academia Cooperation)
2013, 14, 16 Outstanding teaching award in the college of Engineering
2015, 16, 17 Outstanding Industry-Academy Cooperation award in the college of Engineering
2018, 2020~2023 MOST Special Excellence Award in Research
2018 Yuntech Higher Education Sprout Project, Special Bonus Award (Industry-Academia Cooperation)
Patent TWM438496, Bottom bar structure of a precast beam
Voting Member, Committee 318J and 352, Joints and Connections in Monolithic Concrete Structures, American Concrete Institute.
Reviewer of International SCI Journals
Outstanding Reviewer of Engineering Structures, ELSEVIER
ASCE's 2019 Outstanding Reviewer
Peer Reviewer for Seismic Evaluation and Retrofitting Project of School Buildings in Yunlin
Member of code writing committee for concrete structures in the CICHE
Reviewer of International SCI Journals
Outstanding Reviewer of Engineering Structures, ELSEVIER
ASCE's 2019 Outstanding Reviewer
Peer Reviewer for Seismic Evaluation and Retrofitting Project of School Buildings in Yunlin
Member of code writing committee for concrete structures in the CICHE
-
Zhao, Yi-Yao (2024), Seismic Behavior of New Precast Hybrid-Steel Concrete Beam-Column Connections
Dessy Natalia Selly (2024), Development Length of Headed Bars in RC Beam Column Joints Subjected to Cyclic Loading
Nurul Alma Kusumaratih (2024), Seismic Loading Protocols for Mechanical Bars Splices in Concrete Structures
Lee, Wen-Chia (2023), Testing of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Lateral Loading and Constant Axial Force
Yu, Fu-Chi (2023), Modeling of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Lateral Loading and Constant Axial Force
Liu, Teng-Rong (2022), Effect of Column Axial Load on Seismic Performance of Reinforced Concrete Beam-Column Joints
Chang, Tzu-Yu (2021), Tests and Nonlinear Strain Analysis of Mechanical Splices for High-Strength Reinforcement in Special Moment Frames
Huang, Cong-Hao (2020), Seismic behavior and detailing of precast concrete beam-column connections with high-strength reinforcement
Lin, Ming-Jhih (2020), Cyclic tests of eccentric beams framing into a reinforced concrete column on opposite sides
Lin, Jian-Xing (2019), Experimental Study on Minimum Interior Joint Depth for Special Moment Frames with High Strength Reinforcement
Wang, You-Yu (2019), Study on In-Situ Shear Testing for Masonry Wall Panels
Wang, Wun-Yang (2018), Hysteretic behavior of beam-column joints for nonlinear analysis of reinforced concrete frames
Li, Chung-Chi (2018), Experimental study on the acceptance criteria of mechanical bar splices in concrete structures
Huang, Wei-Ching (2017), Pushover analysis of reinforced concrete frames considering joint strength degradation
Huang, Po-Chia (2016), Seismic Testing of High-Strength Reinforced Concrete Exterior Beam-Column-Slab connections
Liu, Wen-Hao (2016), Seismic Testing of High-Strength Reinforced Concrete Interior Beam-Column-Slab connections
Wang, Bang-Zhi (2016), Setup for Design Approval of PC sleeper in Taichung MRT System
Chang, Chia-Jung (2014), Seismic Testing of Shear Strength of New RC Exterior Beam-Column Joints
Chang, You-Ren (2013), Seismic Testing of Shear Strength of New RC Interior Beam-Column Joints
Hsu, Fu-Wei (2012), Experimental Study on Mechanical Splices and Anchorage for Bottom Beam Bars in New RC Beam-Column Connections
Chi, Ying-Chiey (2012), Database Construction and Parameter Analysis of Reinforced Concrete Beam-Column Connections
Kuo, Ching-Han (2011), Seismic Performance of High-Strength Reinforced Concrete Beam-Column Joints
Syu, Jia-Hao (2011), Innovative Anchorage Method for Precast Concrete Beam Bottom Bars in Cast-in-Place Beam-Column Connections – Experimental Investigation
Lin, Ying-Ru (2011), Database Construction and Parameter Study of High-Strength Reinforced Concrete Beam-Column Joints Subjected to Cyclic Load Reversals
Wu, Chen-Yu (2011), Cyclic loading tests of two model frames simulating modern street buildings with stairwell walls
Ou, Jun-You (2010), Seismic Behavior of Steel Moment Frame with Three-Sides Slit RC Wall
Chen, Yong-Lin (2009), Seismic Behavior of RC Moment Frames with 3-sides Slitted Walls
Adrian, S. Leslie (2009), Design Approval Tests and Evaluation of PC Sleepers for TPE Airport MRT System
Jeffrey, David (2009), Anchorage Behavior of Multiple High-Strength Headed Barswithin High-Strength Concrete
Wang, Shu-Chen (2009), Amendment to the Performance Evaluation Criteria for Mechanical Splices and Anchorage Devices of High Strength Reinforcement
Chen, Chia-Wei (2008), Experimental Program on Full-Scale High-Strength Concrete Columns under Concentric Compression
Kang, Jyun-Yao (2007), Improving Bond Performance of Interior RC Beam-Column Joints with Mechanical Anchorage
Lin, Yi-Jhong (2007), Relocating Beam Plastic Hinging Zones of Interior RC Beam-Column Joints with Headed Bars
Yu, Si-Ying (2006), Behavior of Reinforced Concrete Exterior Beam-Column Connections with Screw - Deformed Bars and Mechanical Devices
Ko, Jen-Wen (2005), Cyclic Tests of Reinforced Concrete Corner Beam-Column Joint with Eccentricity
Lin, Chen-Hung (2005), Experimental and Analytical study on Strut-and-Tie ModelingFor Reinforced Concrete Corbels
Dessy Natalia Selly (2024), Development Length of Headed Bars in RC Beam Column Joints Subjected to Cyclic Loading
Nurul Alma Kusumaratih (2024), Seismic Loading Protocols for Mechanical Bars Splices in Concrete Structures
Lee, Wen-Chia (2023), Testing of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Lateral Loading and Constant Axial Force
Yu, Fu-Chi (2023), Modeling of Reinforced Concrete Beam-Column Joints Subjected to Cyclic Lateral Loading and Constant Axial Force
Liu, Teng-Rong (2022), Effect of Column Axial Load on Seismic Performance of Reinforced Concrete Beam-Column Joints
Chang, Tzu-Yu (2021), Tests and Nonlinear Strain Analysis of Mechanical Splices for High-Strength Reinforcement in Special Moment Frames
Huang, Cong-Hao (2020), Seismic behavior and detailing of precast concrete beam-column connections with high-strength reinforcement
Lin, Ming-Jhih (2020), Cyclic tests of eccentric beams framing into a reinforced concrete column on opposite sides
Lin, Jian-Xing (2019), Experimental Study on Minimum Interior Joint Depth for Special Moment Frames with High Strength Reinforcement
Wang, You-Yu (2019), Study on In-Situ Shear Testing for Masonry Wall Panels
Wang, Wun-Yang (2018), Hysteretic behavior of beam-column joints for nonlinear analysis of reinforced concrete frames
Li, Chung-Chi (2018), Experimental study on the acceptance criteria of mechanical bar splices in concrete structures
Huang, Wei-Ching (2017), Pushover analysis of reinforced concrete frames considering joint strength degradation
Huang, Po-Chia (2016), Seismic Testing of High-Strength Reinforced Concrete Exterior Beam-Column-Slab connections
Liu, Wen-Hao (2016), Seismic Testing of High-Strength Reinforced Concrete Interior Beam-Column-Slab connections
Wang, Bang-Zhi (2016), Setup for Design Approval of PC sleeper in Taichung MRT System
Chang, Chia-Jung (2014), Seismic Testing of Shear Strength of New RC Exterior Beam-Column Joints
Chang, You-Ren (2013), Seismic Testing of Shear Strength of New RC Interior Beam-Column Joints
Hsu, Fu-Wei (2012), Experimental Study on Mechanical Splices and Anchorage for Bottom Beam Bars in New RC Beam-Column Connections
Chi, Ying-Chiey (2012), Database Construction and Parameter Analysis of Reinforced Concrete Beam-Column Connections
Kuo, Ching-Han (2011), Seismic Performance of High-Strength Reinforced Concrete Beam-Column Joints
Syu, Jia-Hao (2011), Innovative Anchorage Method for Precast Concrete Beam Bottom Bars in Cast-in-Place Beam-Column Connections – Experimental Investigation
Lin, Ying-Ru (2011), Database Construction and Parameter Study of High-Strength Reinforced Concrete Beam-Column Joints Subjected to Cyclic Load Reversals
Wu, Chen-Yu (2011), Cyclic loading tests of two model frames simulating modern street buildings with stairwell walls
Ou, Jun-You (2010), Seismic Behavior of Steel Moment Frame with Three-Sides Slit RC Wall
Chen, Yong-Lin (2009), Seismic Behavior of RC Moment Frames with 3-sides Slitted Walls
Adrian, S. Leslie (2009), Design Approval Tests and Evaluation of PC Sleepers for TPE Airport MRT System
Jeffrey, David (2009), Anchorage Behavior of Multiple High-Strength Headed Barswithin High-Strength Concrete
Wang, Shu-Chen (2009), Amendment to the Performance Evaluation Criteria for Mechanical Splices and Anchorage Devices of High Strength Reinforcement
Chen, Chia-Wei (2008), Experimental Program on Full-Scale High-Strength Concrete Columns under Concentric Compression
Kang, Jyun-Yao (2007), Improving Bond Performance of Interior RC Beam-Column Joints with Mechanical Anchorage
Lin, Yi-Jhong (2007), Relocating Beam Plastic Hinging Zones of Interior RC Beam-Column Joints with Headed Bars
Yu, Si-Ying (2006), Behavior of Reinforced Concrete Exterior Beam-Column Connections with Screw - Deformed Bars and Mechanical Devices
Ko, Jen-Wen (2005), Cyclic Tests of Reinforced Concrete Corner Beam-Column Joint with Eccentricity
Lin, Chen-Hung (2005), Experimental and Analytical study on Strut-and-Tie ModelingFor Reinforced Concrete Corbels